Be on schedule.Score better.

EN

  Show the process of solving each problem. The answer is already provided.   Review Assignment Kinetics Kinetics, the study of unbalanced forces

  Show the process of solving each problem. The answer is already provided.  

Review Assignment Kinetics

Kinetics, the study of unbalanced forces causing motion, can be analyzed by three methods: inertia force or torque (dynamic equilibrium), work and energy, and impulse and momentum.

Consider the following as you complete your assignment:

· For linear motion the inertia force is

· Equal to 
ma

· Acting through the center of gravity

· Opposite in direction to the acceleration 

· For rotational motion the inertia torque is

· Equal to C

· Opposite in direction to the angular acceleration 

· For a plane motion problem such as a rolling cylinder, try to

· Equate or relate linear acceleration to angular acceleration.

· Take moments at the rolling point of contact with the surface.

Chapter 13: Kinetics

· Section: Problems

· 13-1

Determine the acceleration of the 150-lb block in Figure P13–1 if the coefficient of kinetic friction is 0.4.

a = 9.05 ft/s^2 →

· 13-3

A 130-kg cart is accelerated horizontally by a 250-N force pulling at an angle of 20° above horizontal. Neglecting rolling resistance, determine the acceleration of the cart.

a = 1.81 m/s^2

· 13-7

At what maximum acceleration rate can a 500-N test-strength cable lift a 40-kg mass?

a = 2.69 m/s^2 ↑

· 13-8

What force does a 180-lb man exert on the floor of an elevator that is moving downward and decelerating at 15 ft/s2?

264 lb

· 13-20

The coefficient of kinetic friction for mass B in Figure P13–20 is 0.25. Determine the acceleration of mass A if it has a mass of (a) 30 kg and (b) 50 kg.

aA = 0.76 m/s^2 aA = 0

· 13-36

A 1000-kW generator has a 3500-lb rotor that is accelerated from rest to 3600 rpm in 10 seconds. Determine the torque required. Assume the rotor to be a solid cylinder 40 in. in diameter.

T = 5690 lb-ft

· 13-41

A 150-mm-diameter shaft with a mass of 20 kg is rotating at 900 rpm. A pulley mounted on the shaft has a mass moment of inertia of 0.15 kg ⋅ m2. If the shaft and the pulley coast to a stop due to a tangential frictional force of 8lb at the outer radius of the shaft, determine the time required.

58.9 s

image1.jpeg

image2.jpeg

Table of Contents

[display_short_calculator]

Latest Reviews

Impressed with the sample above? Wait there is more

Related Questions

New questions

Don't Let Questions or Concerns Hold You Back - Make a Free Inquiry Now!